99啪99精品视频在线观看,久久久久免费一区二区三区,久久中文字幕爱爱视频,欧美日韩国产免费一区二区三区

ASTM E1921-13
測量鐵素體鋼在過度范圍內參考溫度的標準試驗方法

Standard Test Method for Determination of Reference Temperature, To, for Ferritic Steels in the Transition Range


標準號
ASTM E1921-13
發布
2013年
發布單位
美國材料與試驗協會
替代標準
ASTM E1921-13a
當前最新
ASTM E1921-23b
 
 
適用范圍

5.1 Fracture toughness is expressed in terms of an elastic-plastic stress intensity factor, KJc , that is derived from the J-integral calculated at fracture.

5.2 Ferritic steels are inhomogeneous with respect to the orientation of individual grains. Also, grain boundaries have properties distinct from those of the grains. Both contain carbides or nonmetallic inclusions that can act as nucleation sites for cleavage microcracks. The random location of such nucleation sites with respect to the position of the crack front manifests itself as variability of the associated fracture toughness (13). This results in a distribution of fracture toughness values that is amenable to characterization using statistical methods.

5.3 Distributions of KJc data from replicate tests can be used to predict distributions of KJc for different specimen sizes. Theoretical reasoning (9), confirmed by experimental data, suggests that a fixed Weibull slope of 4 applies to all data distributions and, as a consequence, standard deviation on data scatter can be calculated. Data distribution and specimen size effects are characterized using a Weibull function that is coupled with weakest-link statistics (14). An upper limit on constraint loss and a lower limit on test temperature are defined between which weakest-link statistics can be used.

5.4 The experimental results can be used to define a master curve that describes the shape and location of median KJc transition temperature fracture toughness for 1T specimens (15). The curve is positioned on the abscissa (temperature coordinate) by an experimentally determined reference temperature, To. Shifts in reference temperature are a measure of transition temperature change caused, for example, by metallurgical damage mechanisms.

5.5 Tolerance bounds on KJc can be calculated based on theory and generic data. For added conservatism, an offset can be added to tolerance bounds to cover the uncertainty associated with estimating the reference temperature, To, from a relatively small data set. From this it is possible to apply a margin adjustment to To in the form of a reference temperature shift.

5.6 For some materials, particularly those with low strain hardening, the value of To may be influenced by specimen size due to a partial loss of crack-tip constraint (


專題


ASTM E1921-13相似標準


推薦

【材料專欄】不銹和不銹鐵是一種東西嗎?

由于不銹鐵材具有優異耐蝕性、成型性、相容性以及很寬溫度范圍內強韌性等系列特點,所以重工業、輕工業、生活用品行業以及建筑裝飾等行業中獲取得廣泛應用。...

低溫壓力容器設計要點及注意事項

①焊接接頭抗拉強度不低于兩側母材中最低抗拉強度較小值。②側熔合線和熱影響區沖擊功應按抗拉強度確定相應V型缺口沖擊功值KV2。③接頭應做側彎試驗,彎心直徑等于4倍試樣厚度,180°。彎曲試驗后在拉伸面上任何方向測量不得有超過1.5mm開裂缺陷,熔合線處也不得有超過3mm開裂缺陷。  ...

強文推薦|鋼鐵熱處理相變表征利器----淬火相變儀DIL805

圖1即TA儀器公司淬火相變儀DIL805(原德國Bahr巴赫),可升級為既能淬火,又能變形和拉伸DIL805ADT。圖1 DIL805ADT外觀圖測量原理是一種多型性相變金屬,其高溫組織(奧氏體)及其轉變產物(、珠光體、貝氏和馬氏體)具有不同比容。...

落錘式?jīng)_擊試驗機用于測定無塑性轉變溫度

?落錘式?jīng)_擊試驗機主要用于測定(包括板材、型材、鑄鋼和鍛無塑性轉變溫度。無塑性轉變溫度表征含有小裂紋鋼材動態加載屈服應力下發生脆斷zui高溫度試驗方法是將一定質量提升到一定高度,然后由靜止釋放,錘自由落體沖擊到試樣表面,從而給試樣進行動態加載。該試驗機集機、電、自動控制技術于一,實現了送料、提錘、沖擊、出樣、抓錘全自動化過程。...


誰引用了ASTM E1921-13 更多引用





Copyright ?2007-2022 ANTPEDIA, All Rights Reserved
京ICP備07018254號 京公網安備1101085018 電信與信息服務業務經營許可證:京ICP證110310號