混凝土抗彎強度試驗的標準方法（使用第三點荷載的簡單梁）

Standard Method of Test for Flexural Strength of Concrete (Using Simple Beam with Third- Point Loading)

玻璃纖維增強混凝土彎曲和沖刷試驗用試樣制備的標準實施規程

Standard Practice for Preparing Coupons for Flexural and Washout Tests on Glass Fiber Reinforced Concrete

玻璃彎曲強度的標準試驗方法（斷裂模量的測定）

Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)

纖維增強混凝土彎曲性能的標準試驗方法（使用帶有第三點載荷的梁）

Standard Test Method for Flexural Performance of Fiber-Reinforced Concrete (Using Beam With Third-Point Loading)

環境溫度下高級陶瓷抗彎強度的標準試驗方法. 圓柱桿強度

Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature&x2014;Cylindrical Rod Strength

環境溫度下高級陶瓷彎曲強度的標準試驗方法圓柱桿強度

Standard Test Method for Flexural Strength of Advanced Ceramics at Ambient Temperature—Cylindrical Rod Strength

公共設施用裝配式混凝土鋪板的標準規格

Standard Specification for Utility Segmental Concrete Paving Slabs

節段混凝土鋪路板標準規范

Standard Specification for Segmental Concrete Paving Slabs

耐火砂漿冷粘強度標準試驗方法

Standard Test Method for Cold Bonding Strength of Refractory Mortar

混凝土的抗彎強度的標準試驗方法 (使用中心點加載的簡支梁)

Standard Test Method for Flexural Strength of Concrete (Using Simple Beam With Center-Point Loading)

水硬性水泥灰漿抗彎強度的標準試驗方法

Standard Test Method for Flexural Strength of Hydraulic-Cement Mortars

石膏面板產品物理測試的標準試驗方法

Standard Test Methods for Physical Testing of Gypsum Panel Products

耐化學侵蝕的灰漿、簿漿及整體面層和聚脂混凝土撓性強度和彈性模數的標準試驗方法

Standard Test Method for Flexural Strength and Modulus of Elasticity of Chemical-Resistant Mortars, Grouts, Monolithic Surfacings, and Polymer Concretes

規格石料彎曲強度的標準試驗方法

Standard Test Method for Flexural Strength of Dimension Stone

尺寸石料彎曲強度的標準試驗方法

Standard Test Method for Flexural Strength of Dimension Stone

尺寸石頭抗彎強度的標準試驗方法

Standard Test Method for Flexural Strength of Dimension Stone

耐火絕熱磚的冷壓碎強度和斷裂模量試驗方法

Standard Test Methods for COLD CRUSHING STRENGTH AND MODULUS OF RUPTURE OF INSULATING FIREBRICK

在室溫條件下采用三點負荷法的炭及石墨加工制品撓曲強度的標準試驗方法

Standard Test Method for Flexural Strength of Manufactured Carbon and Graphite Articles Using Three-Point Loading at Room Temperature

用于涉及靜載荷的彈簧應用金屬扁平材料彎曲試驗的標準試驗方法

Standard Test Methods for Bend Testing of Metallic Flat Materials for Spring Applications Involving Static Loading

結塊的石頭 測試方法 彎曲強度（彎曲）的測定

Agglomerated stone. Test methods. Determination of flexural strength (bending)

石膏板——定義、要求和測試方法

Gypsum plasterboards — Definitions, requirements and test methods

砌體輔助部件的測試方法 門楣抗彎力和抗剪力的測定

Methods of test for ancillary components for masonry. Determination of flexural resistance and shear resistance of lintels

紙和硬紙板 抗彎強度的測定 臺型測試機

Paper and board. Determination of resistance to bending. Taber-type tester

非石棉水泥排水、廢水和通風管及其配件

Non-asbestos cement drainage, wastewater and ventilation pipes and their accessories

紙板 瓦楞紙板的抗屈曲性

Board - Buckling resistance of corrugated board

圬工用灰漿的試驗方法 第11部分：硬化灰漿彎曲強度和耐壓強度的測定（草案）

Methods of test for mortar for masonry - Part 11: Determination of flexural and compressive strength of hardened mortar

砌體試驗方法 第2部分：抗彎強度的測定（草案）

Methods of test for masonry - Part 2: Determination of flexural strength

天然石材試驗方法 集中載荷下彎曲強度的測定（草案）

Natural stone test methods - Determination of flexural strength under concentrated load

工廠制造的雙層金屬面保溫夾芯板 第5部分：設計方法 作用與跨度組合的確定標準（草案）

Factory-made double skin metal faced insulating sandwich panels - Part 5: Design methods - Determination criteria for combining actions and spans

聚結石試驗方法第2部分：抗彎強度（彎曲）的測定（草案）

Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)

磚石工程輔助元部件試驗方法 第9部分：門窗過梁抗彎曲性和抗剪切性測定（草案）

Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels

磁性氧化物或鐵粉制成的軸向引線磁心

Axial lead cores made of magnetic oxides or iron powder

不透性石墨材料試驗方法 第2部分:抗彎強度

Test method of impermeable graphite materials.Part 2:Flexure strength

熔模鑄造低溫模料 第2部分：使用性能試驗方法

Low temperature pattern wax materials for investment casting—Part 2: Testing methods for usability properties

稀土永磁材料物理性能測試方法 第2部分:抗彎強度和斷裂韌度的測定

Test method for physical property of rare earth permanent magnetic materials.Part 2:Determination of bending strength and fracture toughness

陶瓷材料強度試驗方法

Test methods for strength of ceramic materials

瓷磚.第4部分:斷裂模數和斷裂強度的測定

Ceramic tiles — Part 4: Determination of modulus of rupture and breaking strength

鋁生產用碳素材料 預焙陽極和陰極碳?jí)K 第1部分:用三點法測定抗彎強度/剪切強度

Carbonaceous materials used in the production of aluminium - Prebaked anodes and cathode blocks - Part 1: Determination of bending/shear strength by the three-point method

鋁生產用碳素材料.預焙陽極和陰極碳?jí)K.第2部分:用四點法測定抗彎強度

Carbonaceous materials used in the production of aluminium — Prebaked anodes and cathode blocksPart 2:Determination of flexural strength by the four-point method

室外裝飾用木塑墻板

Wood-plastic composite cladding panels for exterior decorate

砌體試驗方法 第2部分：彎曲強度的確定

Methods of test for masonry - Part 2: Determination of flexural strength

砌體輔助構件試驗方法 第9部分：過梁彎曲抗力和剪切抗力的確定

Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels

《前置過濾器》

Prefilter

測試硬化混凝土 第5部分：試樣的彎曲強度

Testing hardened concrete - Part 5: Flexural strength of test specimens

聚結石試驗方法第2部分：抗彎強度（彎曲）的測定

Agglomerated stone - Test methods - Part 2: Determination of flexural strength (bending)

砌體輔助構件的試驗方法 第9部分：門楣抗彎力和抗剪力的測定

Methods of test for ancillary components for masonry - Part 9: Determination of flexural resistance and shear resistance of lintels