金屬材料 拉伸試驗 室溫試驗方法

Metallic materials — Tensile testing — Method of test at room temperature

給水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-鋁-聚乙烯和交聯聚乙烯-鋁-交聯聚乙烯復合壓力管

Methods for destructive testing of welds in metal - Transverse butt tensile tests

給水用1/2 In.(12 mm)到2 In.(50 mm)聚乙烯-鋁-聚乙烯和交聯聚乙烯-鋁-交聯聚乙烯復合壓力管

Methods for destructive testing of welds in metal - All-weld-metal tensile test

金屬材料 拉伸試驗 高溫試驗

Metallic materials — Tensile testing — Test at elevated temperature

球墨鑄鐵管

Standard Specification for Ductile Iron Culvert Pipe

機械彈簧用按尺寸鍍鋅和冷拉鍍鋅碳素鋼絲的標準規格

Standard Specification for Metallic Coated Carbon Steel Wire, Coated at Size and Drawn to Size for Mechanical Springs

一般工業用鑄鐵件通用要求標準規范

Standard Specification for Common Requirements for Iron Castings for General Industrial Use

鉻鉬合金鋼板和帶材

Standard Specification for Steel Sheet and Strip, Chromium-Molybdenum Alloy, for Pressure Vessels

聚合物基復合材料層壓材料錐形和階梯接頭拉伸性能的標準實施規程

Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates

堿性氧氣煉鋼的高溫性能

Elevated-Temperature Properties of Basic-Oxygen Steel

快速加熱條件下金屬材料高溫拉伸試驗實踐

Practice of high temperature tensile test of metal materials under rapid heating conditions

金屬薄板塑性應變比的標準試驗方法

Standard Test Method for Plastic Strain Ratio r for Sheet Metal

金屬材料拉伸試驗的標準試驗方法

Standard Test Methods for Tension Testing of Metallic Materials

柔性屏障材料密封強度的標準測試方法

Standard Test Method for Seal Strength of Flexible Barrier Materials

D8054-測定芳綸扁絲指定伸長率下的模量和力的新測試方法

D8054-New Test Methods for Determination of Modulus and Force at Specified Elongation of Flat Aramid Yarns

D3039_D3039M-聚合物基復合材料拉伸性能的測試方法

D3039_D3039M-Test Method for Tensile Properties of Polymer Matrix Composite Materials

E0646-金屬板材拉伸應變硬化指數（n 值）的標準測試方法

E0646-Standard Test Method for Tensile Strain-Hardening Exponents (n -Values) of Metallic Sheet Materials

用聚合物材料對鋼管進行內襯保護 要求和試驗方法 第2部分：環氧樹脂內襯

Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 2: Epoxy lining

熱塑半成品焊接接頭試驗 拉伸試驗

Testing of welded joints of thermoplastics semi-finished products. Tensile test

球墨鑄鐵管采用聚合物襯里進行內部保護 要求和測試方法 環氧襯里

Internal protection by polymeric lining for ductile iron pipes. Requirements and test methods - Epoxy lining

滑動軸承 金屬多層滑動軸承 軸承金屬層厚度大于或等于 2mm 的粘合破壞性測試

Plain bearings. Metallic multilayer plain bearings. Destructive testing of bond for bearing metal layer thicknesses greater than or equal to 2 mm

金屬材料.拉伸試驗.材料對空心試件內高壓氣體影響的敏感性的評價方法

Metallic materials. Tensile testing. Method for evaluating the susceptibility of materials to the effects of high-pressure gas within hollow test pieces

精細陶瓷（先進陶瓷、先進技術陶瓷） 陶瓷復合材料的增強 環境溫度下多絲束中長絲的拉伸強度和斷裂拉伸應變分布的測定

Fine ceramics (advanced ceramics, advanced technical ceramics) – Reinforcement of ceramic composites – Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature (ISO 2...

不使用引伸計對厚度最大為 0.179 mm 的鋁和變形鋁合金箔材和帶材進行拉伸測試

Tensile test without extensometer on foils and strips of aluminium and wrought aluminium alloys with a thickness up to 0,179 mm

航空航天系列金屬材料試驗方法第001部分：常溫拉伸試驗；英文版 prEN 2002-001:2021

Aerospace series - Metallic materials - Test methods - Part 001: Tensile testing at ambient temperature; English version prEN 2002-001:2021

精細陶瓷（草案）

Fine Ceramics (Draft)

高性能陶瓷.陶瓷復合材料的纖維增強材料.室溫下多絲電纜內細絲失效前拉伸強度和拉伸伸長率分布的測定

High-performance ceramics – fiber reinforcements of ceramic composite materials – determination of the distribution of tensile strength and tensile elongation until failure of filaments within a multifilament cable at room temperature

精細陶瓷（先進陶瓷、先進技術陶瓷） - 陶瓷復合材料的增強 - 環境溫度下多絲絲束內長絲拉伸強度和拉伸應變分布的測定（ISO 2...

Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature (ISO 2...

金屬材料焊縫的破壞性試驗 橫向拉伸試驗（ISO/DIS 4136:2020）

Destructive tests on welds in metallic materials - Transverse tensile test (ISO/DIS 4136:2020); German and English version prEN ISO 4136:2020

金屬材料焊縫的破壞性試驗 熔焊接頭焊縫金屬的縱向拉伸試驗（ISO/DIS 5178:2018）

Destructive tests on welds in metallic materials - Longitudinal tensile test on weld metal in fusion welded joints (ISO/DIS 5178:2018); German and English version prEN ISO 5178:2018

金屬材料 張力測試 第1部分：室溫測試法（草案）

Tensile testing of metallic materials Part 1: Room temperature test method (draft)

金屬材料 拉伸試驗 第2部分：升溫條件下的試驗方法（草案）

Tensile testing of metallic materials Part 2: Test methods under elevated temperature conditions (draft)

硫化橡膠或熱塑性橡膠 在恒定延伸率條件下測定拉伸永久變形、及在恒定拉伸載荷下測定拉伸永久變形、伸長率和蠕變

Rubber, vulcanized or thermoplastic - Determination of tension set under constant elongation, and of tension set, elongation and creep under constant tensile load

樹脂浸漬粗紗和絲束浸漬纖維拉伸性能的測定

Determination of tensile properties of resin impregnated rovings and towpregs

工業用非重復充裝焊接鋼瓶

Non-refillable steel welded cylinders for industrial use

有色金屬細絲拉伸試驗方法

Tensile testing method for fine wire of nonferrous metals

鑄造軸承合金

Cast bearing alloy

塑料 多用途試樣

Plastic.Multipurpose test specimens

變形鋁、鎂及其合金加工制品拉伸試驗用試樣及方法

Specimens and methods for tensile testing of deformed aluminum, magnesium and their alloy processed products

低溫管道用無縫鋼管

Seamless steel tubes for low-temperature-service piping

預應力混凝土用鋼材試驗方法

Test methods of steel for prestressing concrete

金屬材料 拉伸試驗 第3部分：低溫試驗方法

Metallic materials—Tensile testing—Part 3: Method of test at low temperature

軌道列車車輛結構用鋁合金擠壓型材

Aluminium alloys extruded profiles used for structural material of railway vehicle carbodies

金屬材料焊縫破壞性試驗 十字接頭和搭接接頭拉伸試驗方法

Destructive tests on welds in metallic materials—Tensile test on cruciform and lapped joints

貴金屬及其合金鏈.抗拉強度的測定.拉伸試驗法

Precious metal alloys chains.Determination of tensile strength.Method of tensile testing

鋼筋混凝土用鋼材試驗方法

Test methods of steel for reinforcement of concrete

汽車穩定桿用無縫鋼管

Seamless steel tubes for automobile stabilizer bar

金屬材料 拉伸試驗 矩形試樣減薄率的測定

Metallic materials—Tensile testing—Determination of thickness reduction ratio for rectangular specimen

電阻焊電極用Al2O3彌散強化銅片材

Al2O3 dispersion strengthened copper sheet for resistance welding electrode

銅及銅合金材料 室溫拉伸試驗方法

Copper and copper alloy materials—Tensile testing at room temperature

金屬及其合金飾品鏈力學性能測試 拉力測試

Mechanical tests for metal alloys adornment chains—Tensile testing

激光熔覆修復金屬零部件力學性能試驗方法

Testing methods for mechanical properties of metal parts repaired by laser cladding

金屬材料 薄板和薄帶 塑性應變比(r值)的測定

Determination of plastic strain ratio (r-value) of sheet and strip of metallic materials

可鍛鑄鐵件

Malleable iron castings

內襯聚合物涂層的內部防腐蝕 要求和試驗方法 第二部分：環氧材料襯里

Internal protection by polymeric lining for ductile iron pipes — Requirements and test methods — Part 2: Epoxy lining

金屬材料焊縫破壞性試驗 - 焊接金屬焊接縱向拉伸試驗

Destructive tests on welds in metallic materials — Longitudinal tensile test on weld metal in fusion welded joints

金屬材料 - 拉伸試驗 - 第1部分:室溫試驗方法

Metallic materials — Tensile testing — Part 1: Method of test at room temperature

金屬材料拉伸試驗 第4部分：液氦試驗方法

Metallic materials - Tensile testing - Part 4: Method of test in liquid helium

金屬材料 拉伸試驗 材料對空心試件內高壓氣體影響的敏感性的評估方法

Metallic materials - Tensile testing - Method for evaluating the susceptibility of materials to the effects of high-pressure gas within hollow test pieces

金屬材料機械試驗中的測量不確定度

Measurement uncertainties in mechanical tests on metallic materials

埋頭鉚釘.機械試驗

Blind rivets -- Mechanical testing

高溫下測定鋼及耐熱合金拉伸性能的方法

Method of elevated temperature tensile test for steels and heat-resisting alloys

高壓設備用碳素鋼管

Carbon steel pipes for high pressure service

金屬材料拉伸試驗室溫試驗方法

Metallic materials -- Tensile testing -- Method of test at room temperature

金屬材料在液體氦中的拉伸試驗方法

Method of tensile testing for metallic materials in liquid helium

對焊接頭的抗拉試驗方法

Methods of tensile test for butt welded joints

精細陶瓷（先進陶瓷、先進技術陶瓷）-陶瓷復合材料的增強-在環境溫度下測定復絲絲束中細絲斷裂的拉伸強度和拉伸應變分布

Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature

技術陶瓷 復合陶瓷的增強 室溫下復絲中長絲拉伸強度和斷裂應變分布的測定

Technical ceramics - Reinforcement of composite ceramics - Determination of the distribution of tensile strength and tensile breaking strain of filaments in a multifilament yarn at room temperature

金屬材料機械測試中的測量不確定度 拉伸試驗不確定度的評估

Measurement uncertainties in mechanical tests on metallic materials. The evaluation of uncertainties in tensile testing

金屬材料力學試驗的測量不確定度 拉伸試驗不確定度的評估

Measurement uncertainties in mechanical tests on metallic materials — The evaluation of uncertainties in tensile testing (ISO/TR 15263:2024, IDT)

熱塑性塑料半制品焊接接頭試驗 第2部分：拉伸試驗

Testing of welded joints of thermoplastics semi-finished products - Part 2: Tensile test

熱塑性塑料半制品焊接接頭試驗 第7部分：帶有腰型試樣的拉伸試驗

Testing of welded joints of thermoplastics semi-finished products — Part 7: Tensile test with waisted test specimens

精細陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature (ISO 2...

金屬材料 拉伸試驗 第1部分：室溫下的試驗方法（ISO 6892-1:2019）

Metallic materials - Tensile testing - Part 1: Method of test at room temperature (ISO 6892-1:2019)

金屬材料 拉伸試驗 第2部分：高溫下的試驗方法（ISO 6892-2:2018）

Metallic materials - Tensile testing - Part 2: Method of test at elevated temperature (ISO 6892-2:2018)

金屬材料 拉伸試驗 評價空心試件中材料對高壓氣體效應的敏感性的方法（ISO 7039:2024 等同）

Metallic materials — Tensile testing — Method for evaluating the susceptibility of materials to the effects of high-pressure gas within hollow test pieces (ISO 7039:2024, IDT)

汽車用金屬材料圓棒高應變速率室溫拉伸試驗方法

Methods of tensile testing for metal bar at high strain rates at room temperature for the automobile

纖維增強聚合物基復合材料層合板 拉伸性能試驗方法

Test method for tensile properties of fiber reinforced polymer matrix composite laminates

精細陶瓷

Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature (ISO 2...

精細陶瓷（高級陶瓷、高級技術陶瓷） 陶瓷復合材料的增強 環境溫度下多絲束中長絲斷裂拉伸強度和拉伸應變分布的測定

Fine ceramics (advanced ceramics, advanced technical ceramics) - Reinforcement of ceramic composites - Determination of distribution of tensile strength and tensile strain to failure of filaments within a multifilament tow at ambient temperature