單側和雙側壓敏膠粘帶的試驗方法 物理特性 斷裂強度

Methods of test for single sided and double sided pressure-sensitive adhesive tape - Physical properties - Breaking strength

多鋼絲預應力鋼絞線試驗的標準試驗方法

Standard Test Methods for Testing Multi-Wire Steel Prestressing Strand

連續纖維增強先進陶瓷在高溫拉伸加載下的蠕變和蠕變斷裂的標準試驗方法

Standard Test Method for Creep and Creep Rupture of Continuous Fiber-Reinforced Advanced Ceramics Under Tensile Loading at Elevated Temperatures

采用三點加載法測定瓷磚和玻璃瓦的斷裂強度及破裂模量的標準試驗方法

Standard Test Method for Determination of Breaking Strength and Modulus of Rupture of Ceramic Tiles and Glass Tiles by Three-Point Loading

棉纖維斷裂強度和伸長率的標準試驗方法（扁捆法）

Standard Test Method for Breaking Strength and Elongation of Cotton Fibers (Flat Bundle Method)

用抓法測定皮革斷裂強度的標準試驗方法

Standard Test Method for Breaking Strength of Leather by the Grab Method

環圈結或打結的人造紡織纖維斷裂強度的標準試驗方法

Standard Test Methods for Breaking Tenacity of Manufactured Textile Fibers in Loop or Knot Configurations

壓敏膠帶的斷裂強度和伸長率的標準測試方法

Standard Test Method for Breaking Strength and Elongation of Pressure-Sensitive Tape

織物斷裂強度和伸長率的標準試驗方法（抓斗試驗）

Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)

紡織品的伸長和斷裂強度的標準試驗方法(織物抓樣強力試驗)

Standard Test Method for Breaking Strength and Elongation of Textile Fabrics (Grab Test)

紡織帶耐磨性的標準試驗方法(六角棒法)

Standard Test Method for Abrasion Resistance of Textile Webbing (Hex Bar Method)

超級強度合金的化學成分與斷裂強度編纂

Chemical composition and fracture strength of super strength alloys

超級強度合金的化學成分和斷裂強度匯編

Compilation of chemical composition and fracture strength of super strength alloys

超級強度合金的化學成分與斷裂強度編纂

Chemical composition and fracture strength of super strength alloys

采用防護涂料體系對鋼結構進行腐蝕防護 涂層附著力/內聚力（斷裂強度）的評估及驗收標準 拉脫試驗

Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Pull-off testing

自粘膠帶斷裂強度和斷裂伸長率的測量

Self adhesive tapes — Measurement of breaking strength and elongation at break

土工管袋應用技術規范

Technical Specifications for Application of Geotube Bags

瓷磚 第4部分：斷裂模數和破壞強度的測定（草案）

Ceramic tiles Part 4: Determination of modulus of rupture and failure strength (draft)

纖維繩 聚酰胺 3、4、8 和 12 股繩（ISO/DIS 1140:2020）

Fibre ropes - Polyamide - 3-, 4-, 8- and 12-strand ropes (ISO/DIS 1140:2020); German and English version prEN ISO 1140:2020

鞋類 鞋面的測試方法 拉伸強度和伸長率（草案）

Test methods for tensile strength and elongation of footwear uppers (draft)

自粘膠帶 斷裂強度和斷裂伸長率的測量（草案）

Measurement of breaking strength and elongation at break of self-adhesive tapes (draft)

非織造布粘結牢度試驗方法

Test method for bond fastness of nonwoven fabrics

轉杯紡棉本色紗

Cotton rotor spun grey yarn

三維卷曲滌綸牽伸絲

Three-dimensional crimp polyester drawn yarns

苧麻單纖維斷裂強度試驗方法

Test method for breaking strength of ramie single fiber

化學纖維 短纖維拉伸性能試驗方法

Man-made fibre—Test method for tensile properties of staple fibre

錦綸牽伸絲

Polyamide drawn yarn

大麻纖維 第3部分:棉型大麻纖維

Hemp fiber.Part 3:Cotton type hemp fiber

大麻纖維試驗方法 第5部分:斷裂強度試驗方法

Test method for hemp fiber.Part 5:Test method for breaking strength of hemp fiber

間位芳綸短纖維

Meta-aramid staple fiber

聚四氟乙烯短纖維

Polytetrafluoroethylene staple fibre

高強高模聚酰亞胺長絲

High strength and modulus polyimide filament yarns

陶瓷厚涂層的彈性模量與強度試驗方法

Test method for determining elastic modulus and strength of thick ceramic coatings

力學性能測量 REBCO帶材室溫拉伸試驗方法

Mechanical properties measurement—Room temperature tensile test on REBCO wires

對位芳綸長絲

Para-aramid filament

苧麻纖維拉伸斷裂強度試驗方法

Test method for breaking tenacity of ramie fiber

織帶 管狀 低模量芳綸 9/16（14）寬幅 1400（6228）斷裂強度

Webbing@ Tubular@ Low Modulus Aramid 9/16 (14) Wide@ 1400 (6228) Breaking Strength

織帶 管狀 低模量芳綸 3/4（19）寬幅 2300（10 231）斷裂強度

Webbing@ Tubular@ Low Modulus Aramid 3/4 (19) Wide@ 2300 (10 231) Breaking Strength

Webbing Tubular 低模量芳綸 1（25）Wide 4000（17 793）斷裂強度

Webbing@ Tubular@ Low Modulus Aramid 1 (25) Wide@ 4000 (17@793) Breaking Strength

織帶 管狀 低模量芳綸 3-3/16 寬幅 2250（10 008）斷裂強度

Webbing@ Tubular@ Low Modulus Aramid 3-3/16 Wide@ 2250 (10 008) Breaking Strength

布 芳綸中間模量

Cloth, Aramid Intermediate Modulus

小型船舶 錨泊、系泊和拖帶 主要優點（ISO 15084:2003）

Small craft - Anchoring, mooring and towing - Strong points (ISO 15084:2003)

高強度丙綸長絲

High strength polypropylene filament

本體彩色連續玻璃纖維紗

Noumenon colored continuous glass fiber yarn

瓷磚 第4部分：斷裂模量和斷裂強度的測定

Ceramic tiles - Part 4: Determination of modulus of rupture and breaking strength (ISO 10545-4:2019)