共找到 150 條與 名義橫截面積 相關的標準，共 10 頁
本標準適用于測定實心或絞合的銅、鋁及其合金金屬導體材料和電阻材料的導體的橫截面積。本標準規定了導體橫截面積測量方法的范圍、規范性引用文件、試驗設備、試樣的制備、試驗程序、計算和結果、試驗記錄及報告
Conductor cross-sectional area measurement method
DETERMINATION OF CROSS-SECTIONAL AREA OF STRANDED CONDUCTORS
DETERMINATION OF CROSS-SECTIONAL AREA OF STRANDED CONDUCTORS
Test method for spandex filament cross-sectional area
本標準規定了將通過鍛造進行熱成形的半成品的尺寸、形狀和質量公差，即由以下材料制成的鋼錠（Blooms）、扁坯（Slabs）和鋼坯（Billets）： ——符合EN l0250-1～4的一般用途鋼材（參見參考文獻） ——符合EN l0222-1～5的壓力用途鋼材（參見參考文獻） 本標準不包含EN
Semi finished products for forging.Tolerances on dimensions shape and mass
Aerospace; reinforcement fibres; determination of filament diameter, cross-sectional shape and area of filament yarns; measurement of transverse micro-section
Carbon fibers - Determination of diameter and cross-sectional area of filaments
Carbon fibre -- Determination of filament diameter and cross-sectional area
This document specifies five test methods used for the determination of the diameter and crosssectional area of single carbon fibre filaments
Carbon fibre - Determination of filament diameter and cross-sectional area
This International Standard specifies four test methods which may be used for the determination of the diameter and cross-sectional area of single
Carbon fibre - Determination of filament diameter and cross-sectional area
本標準規定了四種可用于測定碳纖維纖維直徑和橫截面積的方法。本標準中“直徑”這個術語適用于所有截面形狀,包括圓形截面的“真”直徑和非圓形截面的“表觀”直徑。本標準適用于碳纖維絲束、碳纖維紗、碳纖維織物等。本標準所給出的某一種方法可能無法直接適用于所有類型的纖維,參照產品規范選擇合適的方法。如果沒有產品
Carbon fibre.Determination of filament diameter and cross-section area
Carbon fibre — Determination of filament diameter and cross-sectional area
本文件規定了用于確定單碳纖維絲直徑和橫截面面積的五種測試方法。不同供應商提供的纖維橫截面形狀差異顯著，所用術語“直徑”適用于所有情況，從準確圓形的“真實”直徑到非圓形的“表觀”直徑均適用。這些方法未必直接適用于所有類型的纖維，具體使用哪個方法由產品規范確定；若沒有規格說明，則需根據判斷選擇合適的方法
Carbon fibre — Determination of filament diameter and cross - sectional area
Carbon fibers - Determination of diameter and cross-sectional area of filaments
Specifies four test methods for the determination of the diameter and cross-sectional area of single carbon fibres. The shape of the cross-section
Carbon fibre - Determination of filament diameter and cross-sectional area
