CNS 7735-1981 塑料之密度測定法–密度梯度法

1.1 本標準規定固體塑料之密度測定法。1.2 本法由觀測試片于形成密度梯度之液柱中所沉降之水平位置，與已知密度之標準比較之

Method of Test for Density of Plastics by the Density - Gradient Technique

SAE AS291D 表面紋理（粗糙度 波紋度和厚度）

Surface Texture, Roughness, Waviness and Lay

DIN 53017:1993 粘度.液體粘度的溫度系數的測定

The document deals with the determination of the temperature coefficient of viscosity of liquids

Viscometry; determination of the temperature coefficient of viscosity of liquids

ASHRAE 3763-1994 預測溫度 濕度 壓力 和/或密度對速度儀表的影響

Predicting the Temperature@ Humidity@ Pressure@ and/or Density Effects on Velocity Instrumentation

QJ 1163.6-1987 深度、高度、長度極限量規型式尺寸 高度量規（L=1～50）

Depth, height, length limit gauge type size height gauge (L=1~50)

MSZ 10783/4-1970 機械角度檢測模式 角度厚度檢測

Mechanical angle detection mode angle thickness detection

OS GSO ISO 3293:2015 莫氏錐柄埋頭孔 適用于 60 度、90 度和 120 度（含）角度

Morse taper shank countersinks for angles 60 degrees, 90 degrees and 120 degrees inclusive

JB/T 5459-1991 電度表用計度器

　　本標準規定了電度表用計度器的術語、產品分類、技術要求、試驗方法及檢驗規則等。 　　本標準適用于安裝式電度表所用的機械正計度器，包括單費率計度器（含正反向累加計度器、正反向雙排計度器）、雙費率計度器和三費率計度器。 　　本標準不適用于最大需量電度表、預付費電度表、標準電度表用計器以及遙測電度表

Register for watt-hour meter

CIE 95-1992 對比度和能見度

The report is divided into three parts. The first partisan introduction where the CIE contrast metric of visibility' is discussed and some recent

Contrast and Visibility (1st Edition) (E)

CSN 42 0956-1989 高溫度梯度鑄鋼

Schválení ST SEV 6158-88 doporu?ilo federální ministerstvo hutnictví, strojírenství a elektrotechniky Zpracovatel a oborové normaliza?ní st?edisko

Steel for higher temperatures for casting. Grades

UNI ISO 3380:1983 銅 硬度溫度測定.

Versione in lingua italiana della ISO 3380 (edizione dic. 1975), adottata senza varianti. Specifica un metodo di determinazione della temperatura di

Leather. Determination of shrinkage temperature.

SNI 7644-2010 空間數據庫海洋學溫度、鹽度、溶解氧、pH、濁度和亮度

Spatial database oceanographic temperature, salinity, dissolved oxygen, pH, turbidity, and brightness

QJ 1163.7-1987 深度、高度、長度極限量規型式尺寸 高度卡規（L=3～60）

Depth, height, length limit gauge type size height caliper (L=3~60)

STAS 12192-1984 齒輪選擇．精密度或精度和粗糙度

1 Prezentul standard cuprinde indica iii cu caracter de recomandare privind alegerea treptelor de precizie ?i mwzit??ii flancurilor

G?ARS Choice or precisions and roughness gear

NS 982:1969 表面粗糙度、參考長度和粗糙度值

Surface roughness, reference lengths and roughness values