共找到 150 條與 氣力輸送系統 相關的標準，共 10 頁
本標準適用于處理可燃顆粒固體的氣力輸送系統的設計、安裝和維護
Standard for Pneumatic Conveying Systems for Handling Combustible Particulate Solids
It is of prime importance for the design and operation of SDH telecommunication networks in multi-vendor, multi-technology and multi-operator
Management Capabilities of Transport Networks Based on the Synchronous Digital Hierarchy (SDH) Series G: Transmission Systems and Media, Digital Systems and Networks Digital Networks - Network Capabilities and Functions (Study Group 13)
本標準規定了用于供水系統的聚乙烯壓力管材和管道的尺寸、材料要求及其他相關規范，適用于3/4英寸到3英寸之間的各種規格
Polyethylene (PE) Pressure Pipe and Tubing, 3/4 In. (19 mm) Through 3 In. (76 mm), for Water Service
Applies to connectors, load-break up to 200 A and dead-break up to 1200 A, for use on power distribution systems at alternating voltages above 1 kV
Separable insulated connectors for power distribution systems above 1 kV
This Recommendation is concerned with describing the management requirements of the layered and partitioned transmission networks described in G.803
(WITHDRAWN) Management Capabilities of Transport Networks Based on the Synchronous Digital Hierarchy (SDH) - Digital Networks (Study Group XVIII) 9 pp
本標準規定了力量平衡式差壓變送器和壓力變送器的主要型式、基本參數、技術要求、試驗方法、檢驗規則、標志、包裝和貯存。 本標準適用于DDZ-Ⅲ系列電動單元組合儀表DBC型力平衡式差壓變送器和DBY型力平衡式壓力變送器。 DDZ-Ⅲ系列電動單元組合儀表力平衡式法蘭式差壓變送器和
DDZ-Ⅲ series process electronic control system.Force balance transmitter
本標準規定了音頻發送機術語、分類、技術要求、試驗方法、檢驗規則、標志、包裝、運輸和貯存要求。 本標準適用于音頻電力負荷控制系統音頻發送機
Audio electrical power load control system--Generic specification for audio transmitters
? ??? ?? ????? ???? ????? ???(?? ???? ??.)? ?? ?
Methods of evaluating the performance of pressure and differentialpressure transmitters for use in industrial-process control systems
本文件規定了輸送系統轉運站流體動力除塵技術的術語和定義、工藝流程、設備組成、技術要求、指標、運行維護等要求。 本文件適用于鋼鐵企業及相關企業各型皮帶機轉卸料裝置配套下的除塵工藝采用的輸送系統轉運站流體動力除塵技術，其他行業可參照?qǐng)?zhí)行
Technical specification for hydrodynamic dust removal of transfer station of conveying system in iron and steel enterprise
Il rapporto tecnico ha lo scopo di fornire indicazioni relative al dimensionamento dei raccordi fabbricati in polietilene (T e curve) per ottenere
Plastics piping pressure systems for the conveyance of fluids - Polyethylene (PE) - Fabricated fittings
本標準規定了力平衡式變送器的主要型式、基本參數、技術要求、試驗方法、檢驗規則、標志、包裝貯存。 本標準適用于DDZ-Ⅱ系列電動單元組合儀表DBC型力平衡式差壓變送器。 DDZ-Ⅱ系列電動單元組合儀表力平衡式法蘭式差壓變送器、浮筒式液位變送器、靶式流量變送器、內孔板式流量變
DDZ-Ⅱ series process electronic control system.Force balance differential pressure transmitter
本標準指定了用于間歇或連續輸送散裝物料的固定氣動處理系統及其組件的特殊安全要求，旨在最小化操作和維護過程中可能出現的危害。 適用于設計、現場組裝和試運行階段，并涵蓋內置執行器和系統的控制部分
Safety requirements for pneumatic conveying of large particles in continuous handling equipment and systems
Methods for evaluating the performance of transmitters for use in industrial-process control systems. Pressure and differential pressure transmitters with analogue d.c.outputs
PipelineNet simulates the fate and transport of potentially introduced contaminants in water distribution systems, particularly as related to use
PipelineNet: An Extended Period Simulation Hydraulic Model for Distribution System Emergency Response
Revisions to the pressure gauge requirements
Standard for Safety for Power-Operated Pumps for Petroleum Dispensing Products (proposals dated 4/30/10)
