MIL MIL-DTL-5423/13C-2008 防塵防水密封罩 D 型（用于杠桿操作斷路器） 類型 1（面板安裝 無安裝框架）

Boot, Dust and Water Seal, Type D (for Lever Operated Circuit Breakers), Style 1 (Panel Mounted without Mounting Frame)

EN 13880-9:2003 熱接合密封劑.第9部分:與瀝青路面兼容性測定的試驗方法

This European Standard describes a method for determining the compatibility of hot applied joint sealants applied to a saw asphalt joint slot

Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements

DLA MIL-DTL-5423/13 D-2009 防塵防水密封罩，D 型（用于杠桿操作的斷路器），1 型（面板安裝，無安裝框架）

BOOT, DUST AND WATER SEAL, TYPE D (FOR LEVER OPERATED CIRCUIT BREAKERS), STYLE 1 (PANEL MOUNTED WITHOUT MOUNTING FRAME)

MIL MIL-DTL-5423/13D-2009 防塵防水密封罩 D 型（用于杠桿操作斷路器） 類型 1（面板安裝 無安裝框架）

Boot, Dust and Water Seal, Type D (for Lever Operated Circuit Breakers), Style 1 (Panel Mounted without Mounting Frame)

MIL MIL-DTL-5423/13E-2019 防塵防水密封罩 D 型（用于杠桿操作斷路器） 類型 1（面板安裝 無安裝框架）

Boot, Dust and Water Seal, Type D (for Lever Operated Circuit Breakers), Style 1 (Panel Mounted without Mounting Frame)

AASHTO M 324-2004 混凝土和瀝青路面熱敷接縫和裂縫密封劑的標準實施規程

AASHTO M 324-04 is identical to ASTM D6690-01 except provisions specified in this document

Standard Practice for Joint and Crack Sealants, Hot Applied, for Concrete and Asphalt Pavements

ASTM D8099/D8099M-17 瀝青乳液鋪面密封料(礦質膠體或化學穩定類型)的標準規格

1.1 This specification covers water based asphalt

Standard Specification for Asphalt Emulsion Pavement Sealer (Mineral Colloid or Chemically Stabilized Type)

ASTM D7158-06 密封瀝青墻面板風阻力的標準試驗方法（上升力/上升阻力法）

1.1 This test method covers the procedure for calculating the wind resistance of asphalt shingles when applied in accordance with the manufacturer

Standard Test Method for Wind Resistance of Sealed Asphalt Shingles (Uplift Force/Uplift Resistance Method)

NF E29-831:1979 管道.鍍鋅鋼制單咬邊金屬軟管.( 橡膠襯料，壓力密封，圓截面）

Pipeworks. Flexible metal hoses, single interlock, rubber packing, pressure-tight, circular section, in galvanized steel.

GOST 28942.2-1991 管路的螺紋連接.圓形截面的橡膠圈密封的擰入彎頭.結構

Fittings made on the thread. Stud elbows for O-ring face seal. Construction

GOST 28942.1-1991 管路的螺紋連接.圓形截面的橡膠圈密封的擰入接頭.結構

Fittings made on the thread. Swiveling adaptors for O-ring face seal. Construction

DS/EN 13880-9:2003 熱涂接縫密封膠 第9部分：測定與瀝青路面相容性的試驗方法

This European Standard describes a method for determining the compatibility of hot applied joint sealants applied to a saw asphalt joint slot

Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements

DIN 18532-5 A1 E:2018-04 防水混凝土行車面的密封 第5部分：使用聚合瀝青片材和單層合成或彈性材料層的密封 修正案 A1

Sealing of concrete driving surfaces for waterproofing - Part 5: Sealing using polymerised bituminous sheets and a single layer of synthetic or elastomeric material Amendment A1

ASTM D7158-07 密封瀝青屋面板的防風用標準試驗方法(上升力/抗上升力方法)

1.1 This test method covers the procedure for calculating the wind resistance of asphalt shingles when applied in accordance with the manufacturer

Standard Test Method for Wind Resistance of Sealed Asphalt Shingles (Uplift Force/Uplift Resistance Method)

LST EN 13880-9-2004 熱涂接縫密封膠 第9部分：測定與瀝青路面相容性的試驗方法

Hot applied joint sealants - Part 9: Test method for the determination of compatibility with asphalt pavements