共找到 150 條與 玻璃轉移溫度 相關的標準，共 10 頁
Prezentul standard se refer? ]a eprubetele negradate confec?ionate din stiel? neutr?, sticl? tip Turdaterm ?i tip Pyrom, utilizate ?n laboratoare la
Laboratory glasswere NON GRADUATED GLASS TUBES
Laboratory glassware－Graduated pipettes－Part 4：Blow－out pipettes
Glass for thermometer bulbs
Glass-lined thermometer sleeve
Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.
Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
Liquid-in-Glass Thermometers
Calibration specification for glass grating line displacement standard scale up to 1000mm in length
This part of ISO 835 specifies requirements for an internationally acceptable series of graduated blow-out pipettes, which are adequate for general
Laboratory glassware - Graduated pipettes Part 4: Blow-out pipettes
Testing method for knoop indentation hardness of glass and glass-ceramics
Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
本標準規定了搪玻璃溫度計套的結構及組配型式、參數、主要尺寸和技術要求。 本標準適用于設計壓力不大于1.0MPa，設計溫度高于-20°C至200°C的搪玻璃設備用溫度計
Glass-lined thermometer tube
本標準規定了搪玻璃溫度計套的結構及組配型式、參數、主要尺寸和技術要求。 本標準適用于公稱壓力小于或等于1.0 MPa，介質溫度高于-20℃低于或等于200℃，配置錨式或框式攪拌器的搪玻璃攪拌容器的溫度計套，也適用于配置槳式或葉輪式攪拌器，其容器公稱直徑小于或等于500mm的攪拌容器用溫度計
Glass Lined Thermometer Set
Liquid-in-Glass Thermometers
Laboratory glassware — Graduated pipettes — Part 4: Blow-out pipettes
