共找到 150 條與 采樣探頭 相關(guān)的標準，共 10 頁
5.1 This test method for determining the puncture strength of geotextiles is to be used
Standard Test Method for the Static Puncture Strength of Geotextiles and Geotextile-Related Products Using a 50-mm Probe
5.1 Applying Test
Standard Practice for Measuring Sheet Resistance of Thin Film Conductors for Flat Panel Display Manufacturing Using a Four-Point Probe Method
This standard was transferred to SEMI (www.semi.org) May 20031.1 This test method covers the direct measurement of the sheet resistance and its
Standard Test Method for Sheet Resistance Uniformity Evaluation by In-Line Four-Point Probe with the Dual-Configuration Procedure (Withdrawn 2003)
Microbeam analysis. Electron probe microanalysis. Guidelines for qualitative point analysis by wavelength dispersive X-ray spectrometry
Non-destructive testing of welds -- Radiographic testing -- Part 2: X- and gamma-ray techniques with digital detectors
This document specifies characterization tests to be performed at the end of the fabrication of an array probe. It defines both methodology
Non-destructive testing — Characterization and verification of ultrasonic phased array equipment — Part 2: Array probes (ISO 18563-2:2024, IDT)
Methods of soil investigations for agricultural engineering; field tests; determination of the hydraulic conductiv1fy by auger hole methodEs wird
Methods of soil investigations for agricultural engineering; field tests, determination of the hydraulic conductivity by auger hole method
Draft Document - Nuclear instrumentation - Data format for list-mode digital data acquisition used in radiation detection and measurement (IEC 45/817/CD:2016)
Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement (IEC 63047:2018 + COR1:2020), with CD-ROM
Electromagnetic compatibility and Radio spectrum Matters (ERM); System reference document; Short Range Devices (SRD); Equipment for Detecting Movement using Ultra Wide Band (UWB) radar sensing technology; Level Probing Radar (LPR)-sensor equipment operati
This international standard specifies the format of binary list-mode data at the output of digital data acquisition devices used for the detection
Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement (IEC 63047:2018 + COR1:2020); German version EN IEC 63047:2021
BS EN ISO 17636-2. Non-destructive testing of welds. Radiographic testing. Part 2. X- and gamma-ray techniques with digital detectors
5.1 Some process catalysts used in refining can
Standard Test Method for Determination of Total Sulfur in Liquid Hydrocarbon Based Fuels by Continuous Injection, Air Oxidation and Ultraviolet Fluorescence Detection
Draft Document - Nuclear instrumentation - Data format for list mode digital data acquisition used in radiation detection and measurement (IEC 63047:2018 + COR1:2020); German version prEN IEC 63047:2020
1 Scope This Parti
Medical Electrical Equipment - Part 2: Particular Requirements for the Safety of Dosimeters Used in Radiotherapy With Electrically-Connected Radiation Detectors (Adopted IEC 601-2-9:1987)
