共找到 150 條與 陽極電位滴定法 相關的標準，共 10 頁
本標準規定了采用電位滴定法測定硫酸陽極氧化溶液中游離硫酸和化合硫酸含量的方法原理、儀器、試劑、分析步驟及分析結果的計算。 本標準適用于硫酸陽極氧化溶液中游離硫酸和化合硫酸含量的測定
Analytical method of aluminum alloy sulfuric acid anodic oxidation solution Potentiometric titration determination of free sulfuric acid and combined sulfuric acid
本標準規定了采用電位滴定法測定硫酸陽極氧化溶液中鋁含量的方法原理、試劑、儀器、分析步驟及分析結果的計算。 本標準適用于硫酸陽極氧化溶液中鋁含量的測定。測定范圍：20～40g/L
Analytical method of sulfuric acid anodic oxidation solution of aluminum alloy - Determination of aluminum content by potentiometric titration
本標準規定了采用電位滴定法測定鉻酸陽極氧化溶液中氯離子含量的方法原理、試劑、儀器、分析步驟及分析結果的計算。 本標準適用于鉻酸陽極氧化溶液中氯離子含量的測定。 測量范圍：0.10～0.30g/L
Analytical method of aluminum alloy chromic acid anodizing solution for determination of chloride ion content by potentiometric titration
本標準規定了采用電位滴定法測定硫酸陽極氧化溶液中氯離子含量的方法原理、試劑、儀器、分析步驟及分析結果的計算。 本標準適用于硫酸陽極氧化溶液中氯離子含量的測定。測定范圍：0.10～0.30g/L
Analysis method for aluminum alloy sulphide acid anodizing solution Determination of chloride Ion content through potentiometric titration
The availability of a standard procedure, standard material, and a standard plot should make it easy for an investigator to check his techniques
Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
本標準規定了用擊穿電位法測定鋁及鋁合金陽極氧化膜的絕緣性。 本標準適用于以絕緣性能為目的和以擊穿電位原理制定工藝規范的陽極氧化膜
Anodizing of aluminium and its alloys. Insulation check.by measurement of breakdown potential
The ability to accurately measure chlorine or other disinfectants in water is importantfor control of microorganisms. Whereas amperometry is specific
Journal AWWA — Titration of Chlorine: Amperometric Versus Potentiometric
3.1 The availability of a standard procedure, standard material, and a standard plot should make
Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
3.1 The availability of a standard procedure, standard material
Standard Reference Test Method for Making Potentiodynamic Anodic Polarization Measurements
Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
General rules for methods of potentiometric, amperometric, coulometric and Karl-Fisher titrations
General rules for methods of potentiometric, amperometric, coulometric and Karl-Fisher titrations
來自第附錄46頁
Appendix VIII A Potentiometric Titration and Permanent Stop Titration
1.1 This test method describes an experimental procedure for checking experimental technique and instrumentation. If followed, this test method
Standard Reference Test Method for Making Potentiostatic and Potentiodynamic Anodic Polarization Measurements
