共找到 144 條與 額定彎曲負荷 相關的標準，共 10 頁
SAME AS ISO 10545-4
Ceramic tiles. Part 4: Determination of flexural strength and breaking load. (ISO 10545-4:1994).
1.1 本標準規定了一種在特定條件下（如預處理、溫度和濕度）測定塑料標準試樣彎曲蠕變的方法。僅適用于中點加載的簡單自由支撐梁（三點加載試驗）。 1.2 該方法適用于剛性、半剛性非增強、填充和纖維增強塑料材料（見JIS K 6900:1994），形式為直接模制或從板材或模制品切割的矩形條。 1.3 該
Plastics -- Determination of creep behaviour -- Part 2: Flexural creep by three-point loading
This part of ISO 75 specifies a method for the determination of the temperature of deflection under load of highstrength thermosetting laminates
Plastics - Determination of temperature of deflection under load - High-strength thermosetting laminates and long-fibre-reinforced plastics
This part of ISO 75 specifies three methods, using different values of constant flexural stress, which can be used for the determination
Plastics — Determination of temperature of deflection under load — Part 2: Plastics and ebonite
Plastics - Determination of temperature of deflection under load - Part 2 : plastics and ebonite
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading
La norma specifica un metodo per determinare lo scorrimento a flessione delle materie plastiche sotto forma di provini normalizzati in condizioni
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading
BS EN 12372. Natural stone test methods. Determination of flexural strength under concentrated load
Plastics - Determination of creep behaviour - Part 2: Flexural creep by three-point loading
La presente norma è la versione ufficiale in lingua italiana della norma europea EN 846-4 (edizione novembre 2001). La norma specifica metodi per
Methods of test for ancillary components for masonry - Determination of load capacity and load-deflection characteristics of straps
Diese ?NORM beschreibt eine Methode für die Bestimmung des Widerstandes bestimmter Teile vom Langlaufski gegen Bruch, wenn sie quasistatisch belastet
Cross country skis; determination of breaking load and deflection at break under quasistatic load
Plastics.determination of creep behaviour.part 2: flexural creep by three.point loading
Determination of static bending strength under two point loading (See IS 1708: PARTS 1 TO 18)
ISO 75的一部分提供了一種通用測試方法，用于測定塑料在負載下的撓曲溫度（三點加載下的彎曲應力）。定義了不同類型的試樣和不同的恒定負載，以適應不同類型的材料。 ISO 75-2給出了塑料（包括填充塑料和纖維增強塑料，其中纖維在加工前長度不超過7.5毫米）和硬橡膠的具體要求，而ISO 75-3給出了
Determination of deflection temperature of plastics under load Part 1: General test method (draft)
Plastics piping systems - Testing of pipes and components - Determination of flexural creep of plastics by four-point loading
