SS-ISO 23369:2022
Hydraulic fluid power filters - Multi-pass method of evaluating filtration performance of a filter element under cyclic flow conditions (ISO 23369:2021, IDT)
- 標準號
- SS-ISO 23369:2022
- 總頁數
- 11頁
- 發布單位
- 瑞典標準研究所
- 當前最新
- SS-ISO 23369:2022
- 適用范圍
- This document specifies: a) A multi-pass filtration performance test under cyclic flow conditions with continuous contaminant injection for hydraulic fluid power filter elements. b) A procedure for determining the contaminant capacity, particulate removal and differential pressure characteristics. c) A test currently applicable to hydraulic fluid power filter elements that exhibit an average filtration ratio greater than or equal to 75 for particle sizes ≤25?μm(c), and a final test system reservoir gravimetric level of less than 200?mg/L. It is necessary to determine by validation the range of flow rates and the lower particle size limit that can be used in test facilities. d) A test using ISO12103-1 A3 medium test dust contaminant and a test fluid. This document provides a test procedure that yields reproducible test data for appraising the filtration performance of a hydraulic fluid power filter element without influence of electrostatic charge. This document is applicable to three test conditions: 1)??? Base upstream gravimetric level of 3?mg/L. 2)??? Base upstream gravimetric level of 10?mg/L. 3)??? Base upstream gravimetric level of 15?mg/L.