ZH
KR
JP
ES
RU
DE

Resin materialization temperature

Resin materialization temperature, Total:96 items.

In the international standard classification, Resin materialization temperature involves: Paint ingredients, Plastics, Wood-based panels, Footwear, Construction materials, Materials for aerospace construction, Insulating materials, Non-metalliferous minerals, Products of the chemical industry, Analytical chemistry, Dentistry, Rubber and plastics products, Electrical wires and cables.

CZ-CSN, Resin materialization temperature

• CSN 64 0341-1990 Plastics. Termosetting casting resins. etermination of temperature increa- e of epoxy resins during curing
• CSN 65 8510-1987 Resin of wood

IT-UNI, Resin materialization temperature

• UNI 5814-1966 Plastic material testing. Determination of maximum temperature and rate of temperature increase during hardening of unsaturated polyester resin

PT-IPQ, Resin materialization temperature

• NP 236-1989 Pitch Determination of mollification temperature

German Institute for Standardization, Resin materialization temperature

• DIN 53180:1996 Binders for paints and varnishes - Determination of the softening temperature of resins
• DIN 53749:1970 Chemical Analysis of Urea-, Thiourea- and Melamine-formaldehyde Resins and Aminoplastic Moulding Materials in the Moulded and Unmoulded State
• DIN 53748:1970 Chemical Analysis of Phenol-formaldehyde Resins; Phenoplastic Moulding Materials and Moulded Materials
• DIN 18556:1985 Testing of coating material for synthetic resin plasters and of synthetic resin plasters
• DIN EN ISO 308:1998 Plastics - Phenolic moulding materials - Determination of acetone-soluble matter (apparent resin content of material in the unmoulded state) (ISO 308:1994); German version EN ISO 308:1997
• DIN EN ISO 9771:1997-05 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions (ISO 9771:1995); German version EN ISO 9771:1997

SAE - SAE International, Resin materialization temperature

• SAE AMS3135D-1984 Coating Material@ Silicone Resin 205 Degrees C (400 Degrees F) Cure
• SAE AMS3135F-2009 Coating Material@ Silicone Resin 400 Degree F (205 Degree C)
• SAE AMS3727B-1995 RESIN@ EPOXY@ MATRIX@ THERMOSETTING MODERATE TEMPERATURE RESISTANT@ UNFILLED
• SAE AMS3690D-2016 Adhesive Compound@ Epoxy Room Temperature Curing

Spanish Association for Standardization (UNE), Resin materialization temperature

• UNE 104-281 Pt.2-3-1986 Asphalt materials and modified asphalt emulsion materials. Experimental methods for bitumen and resins. temperature
• UNE-EN ISO 9771:1997 PLASTICS. PHENOLIC RESINS. DETERMINATION OF THE PSEUDO-ADIABATIC TEMPERATURE RISE OF LIQUID RESOLS WHEN CURED UNDER ACID CONDITIONS (ISO 9771:1995).

RU-GOST R, Resin materialization temperature

• GOST 21970-2015 Unsaturated polyester resins. Methods for determination of maximum temperature during the setting
• GOST 32716-2014 Facing material based on impregnated papers with a deep degree or resin cure. Specifications
• GOST R 55923-2013 Facing material based on impregnated papers with a deep degree or resin cure. Specificafications
• GOST 29326-2015 Plastics. Phenolic resins. Determination of reactivity of resols under acid conditions
• GOST 16388-2017 Phenol-formaldehyde resins. Method for determination of drop temperature
• GOST 16388-1970 Phenol-formaldehyde resins. Method for determination of drop temperature

General Motors Corporation (GM), Resin materialization temperature

• GM 9986062-1995 Epoxy, Two-Part, Room Temperature Cure, Resin

Guangdong Provincial Standard of the People's Republic of China, Resin materialization temperature

• DB44/T 2045-2017 Determination of Glass Transition Temperature of Synthetic Resin Emulsion

HU-MSZT, Resin materialization temperature

• MSZ KGST 893-1978 The definition of unsaturated polyester resin, the gel time of the resin is 298 degrees (25 ℃)

Society of Automotive Engineers (SAE), Resin materialization temperature

• SAE AMS3135E-2001 (Noncurrent)Coating Material, Silicone Resin 205 Degrees C (400 Degrees F) Cure
• SAE AMS3372A-2001 Silicone Resin, Elastomeric High Tear Strength Elevated Temperature Cure
• SAE AMS3372-1969 SILICONE RESIN, ELASTOMERIC High Tear Strength, Elevated Temperature Cure
• SAE AMS3135C-1978 COATING MATERIAL, SILICONE RESIN 400° F (205° C) Cure
• SAE AMS3135B-1976 COATING MATERIAL, SILICONE RESIN 400° F (204° C) Cure
• SAE AMS3135D-1994 COATING MATERIAL, SILICONE RESIN 205°C (400°F) Cure
• SAE AMS3135A-1966 SILICONE RESIN COATING MATERIAL 400 F (204 C) Cure
• SAE AMS3727A-1993 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
• SAE AMS3727-1988 RESIN, EPOXY, MATRIX, THERMOSETTING Moderate Temperature Resistant, Unfilled
• SAE AMS3690B-1993 Adhesive Compound, Epoxy, Room Temperature Curing
• SAE AMS3690B-2000 Adhesive Compound, Epoxy Room Temperature Curing
• SAE AMS3690-1960 ADHESIVE COMPOUND, EPOXY Room Temperature Curing
• SAE AMS3136-1962 PHENOLIC RESIN COATING MATERIAL, TFE PIGMENTED 300 F Cure
• SAE AMS3135-1959 SILICONE RESIN COATING MATERIAL 400F CURE

SCC, Resin materialization temperature

• HOLDEN HN 1896-2012 Resinated Sound Insulation Material
• HOLDEN HN 1896-1990 Resinated Sound Insulation Material
• BS ISO 13651:1996 Plastics. Epoxy resins and related materials. Determination of total saponifiable chlorine
• 11/30211364 DC BS ISO 14322. Plastics. Epoxy resins. Determination of degree of cure of cured epoxy resins by differential scanning calorimetry
• DANSK DS/EN ISO 9771:1997 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
• AENOR UNE-EN ISO 9771:1997 PLASTICS. PHENOLIC RESINS. DETERMINATION OF THE PSEUDO-ADIABATIC TEMPERATURE RISE OF LIQUID RESOLS WHEN CURED UNDER ACID CONDITIONS (ISO 9771:1995).
• BS 5664-3.1:1995 Solventless polymerisable resinous compounds used for electrical insulation. Specification for individual materials-Unfilled epoxy resinous compounds
• NS-ISO 4049:1988 Dentistry — Resin-based filling materials

GSO, Resin materialization temperature

• GSO ISO 9944:2013 Plastics - Phenolic resins - Determination of electrical conductivity of resin extracts
• GSO ISO 21627-2:2013 Plastics -- Epoxy resins -- Determination of chlorine content -- Part 2: Easily saponifiable chlorine
• OS GSO ISO 2535:2015 Plastics -- Unsaturated-polyester resins -- Measurement of gel time at ambient temperature
• GSO ISO 2535:2015 Plastics -- Unsaturated-polyester resins -- Measurement of gel time at ambient temperature
• BH GSO ISO 9771:2016 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
• OS GSO ISO 9771:2013 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
• BH GSO ISO 2535:2016 Plastics -- Unsaturated-polyester resins -- Measurement of gel time at ambient temperature

National Aeronautics and Space Administration (NASA), Resin materialization temperature

• NASA UFGS-09 67 23.13-2010 STANDARD RESINOUS FLOORING

U.S. Military Regulations and Norms, Resin materialization temperature

• ARMY MIL-P-13436 A VALID NOTICE 3-2013 PLASTIC SHEET, FILLED PHENOLIC, UNCURED

SE-SIS, Resin materialization temperature

• SIS SS 16 67 06-1980 Plastics - Determination of the maximum temperature and the rate of increase of temperature during the setting of unsaturated polyester resins
• SIS 16 85 01-1963 Thermosetting resinbonded laminates for industrial use.

International Organization for Standardization (ISO), Resin materialization temperature

• ISO 4583:1978 Plastics; Epoxide resins and related materials; Determination of easily saponifiable chlorine
• ISO 4583:1998 Plastics - Epoxy resins and related materials - Determination of easily saponifiable chlorine
• ISO 6907:1994 Rubber footwear - Vulcanized resin rubber and vulcanized high-hardness rubber soling material - Specifications
• ISO 9371:1990 Plastics; phenolic resins in the liquid state or in solution; determination of viscosity

TR-TSE, Resin materialization temperature

• TS 3398-1979 PLASTICS — EPOXIDE RESINS AND RELATED MATERIALS- DETERMINATION OF EASILY SAPONIFIABLE CHLORINE
• TS 703-1969 PLASTICS DETERMINATION OF THE MAXIMUM TEMPERATURE AND THE RATE OF INCREASE OF TEMPERATURE DURING THE SETTING OF UNSATURATED POLYESTER RESINS

European Committee for Standardization (CEN), Resin materialization temperature

• EN ISO 4583:1998 Plastics - Epoxy Resins and Related Materials - Determination of Easily Saponifiable Chlorine Supersedes ISO 4583:1998; Superseded by EN ISO 21627-2:2003
• EN ISO 9371:1995 Plastics - Phenolic Resins in the Liquid State or in Solution - Determination of Viscosity (ISO 9371 : 1990)

British Standards Institution (BSI), Resin materialization temperature

• BS EN ISO 4583:1998 Plastics — Epoxy resins and related materials — Determination ofeasily saponifiable chlorine
• BS EN ISO 9771:1997 Plastics. Phenolic resins. Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
• BS EN IEC 60455-3-8:2021 Resin based reactive compounds used for electrical insulation. Specifications for individual materials. Resins for cable accessories
• BS 5664-3.11:1995 Solventless polymerisable resinous compounds used for electrical insulation. Specification for individual materials. Epoxy resin-based coating powders
• BS EN 50655-1:2023 Electric cables. Accessories. Material characterization - Fingerprinting for resinous compounds
• BS EN 50655-1:2017 Electric cables. Accessories. Material characterization. Fingerprinting for resinous compounds

Japanese Industrial Standards Committee (JISC), Resin materialization temperature

• JIS K 6755:1999 Plastics -- Epoxy resins and related materials -- Determination of easily saponifiable chlorine
• JIS C 2263:1992 Resin rich mica paper materials
• JIS C 2263:1999 Resin rich mica paper materials
• JIS K 7246:2000 Plastics -- Epoxy resins and related materials -- Determination of total saponifiable chlorine

Korean Agency for Technology and Standards (KATS), Resin materialization temperature

• KS M ISO 6907-2008(2013) Rubber footwear－Vulcanized resin rubber and vulcanized high-hardness rubber soling materials－Specification
• KS M ISO 6907-2021 Rubber footwear－Vulcanized resin rubber and vulcanized high-hardness rubber soling materials－Specification
• KS M ISO 6907:2008 Rubber footwear－Vulcanized resin rubber and vulcanized high-hardness rubber soling materials－Specification
• KS P 5324-2006(2011) Dentistry resin based filling materials
• KS M ISO 2535-2020 Plastics－Unsaturated-polyester resins－Measurement of gel time at ambient temperature
• KS G 2012-1984 Plastic RESIN profile for chairs
• KS P 5315-2014 Dental resin based filling materials

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Resin materialization temperature

• GB/T 4618-1984 Epoxide resins and related materials--Determination of easily saponifiable chlorine
• GB/T 32675-2016 Plastics.Phenolic resins.Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions
• GB/T 24411-2009 Phenolic resin for friction materials

US-FCR, Resin materialization temperature

• FCR UFGS-32 12 18-2008 RESIN MODIFIED PAVEMENT SURFACING MATERIAL

Taiwan Provincial Standard of the People's Republic of China, Resin materialization temperature

• CNS 2985-1974 Urea Resin Molding Compounds

FI-SFS, Resin materialization temperature

• SFS 3822-1976 plastic. Polyvinyl chloride resin. Determination of bulk density of packaged resin

Danish Standards Foundation, Resin materialization temperature

• DS/EN ISO 9771:1997 Plastics - Phenolic resins - Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions

Professional Standard - Aviation, Resin materialization temperature

• HB 7614-1998 Differential Scanning Calorimetry (DSC) Test Method for Degree of Curing of Composite Resin Matrix

YU-JUS, Resin materialization temperature

• JUS G.S1.814-1991 Plastics.Epoxide resins and related materials. Determination of easily saponifiable chlorine

PL-PKN, Resin materialization temperature

• PN BN 3076-02-1966 Electrical insulation materials. Grade B epoxy hardened glass fiber panels

American Society for Testing and Materials (ASTM), Resin materialization temperature

• ASTM C722-94 Standard Specification for Chemical-Resistant Resin Monolithic Surfacings

Standard Association of Australia （SAA）, Resin materialization temperature

• AS 1278:1982 Resin-based dental restorative materials

Group Standards of the People's Republic of China, Resin materialization temperature

• T/CSRA 3-2020 Phenolic resin for electronic materials

Others:   Materials with a high glass transition temperature, The glass transition temperature of the material, The glass transition temperature of the resin, Resin materialization temperature.