ZH
KR
JP
ES
RU
DE

Warm-up time in UV

Warm-up time in UV, Total:62 items.

In the international standard classification, Warm-up time in UV involves: Electronic tubes, Paints and varnishes, Domestic, commercial and industrial heating appliances, Plastics, Reinforced plastics, Aircraft and space vehicles in general, Electrical accessories.

RU-GOST R, Warm-up time in UV

• GOST 19438.17-1977 Low-power electronic tubes and valves. Methods of measurement of cathode heating time and readiness time
• GOST 21011.5-1978 High-voltage kenotrons. Methods of measurement of cathode heatting time and readiness time controlling

YU-JUS, Warm-up time in UV

• JUS N.R1.108-1977 Electronic tubes. Measurements of the electrical properties. Measurement of cathode heating time and heater warm-up time

American Society for Testing and Materials (ASTM), Warm-up time in UV

• ASTM D3732-82(2005) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
• ASTM D3732-82(2001) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
• ASTM D3732-82(1996)e1 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
• ASTM D3732-82(2017) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
• ASTM D3732-23 Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings
• ASTM D3732-82(2011) Standard Practice for Reporting Cure Times of Ultraviolet-Cured Coatings

General Administration of Quality Supervision, Inspection and Quarantine of the People‘s Republic of China, Warm-up time in UV

• GB/T 7287.4-1987 Measuring method for temperature rise time and fall time of infrared heater
• GB/T 14280-1993 Thermal time delay switch,Generic specification of

SAE - SAE International, Warm-up time in UV

• SAE AIR4279-1995 Heat Up Time

GSO, Warm-up time in UV

• OS GSO IEC 60151-8:2014 Measurements of the electrical properties of electronic tubes and valves - Part 8: Measurement of cathode heating time and heater warm-up time
• BH GSO IEC 60151-8:2016 Measurements of the electrical properties of electronic tubes and valves - Part 8: Measurement of cathode heating time and heater warm-up time
• GSO IEC 60151-8:2014 Measurements of the electrical properties of electronic tubes and valves - Part 8: Measurement of cathode heating time and heater warm-up time
• GSO ISO 2578:2015 Plastics -- Determination of time-temperature limits after prolonged exposure to heat

IPC - Association Connecting Electronics Industries, Warm-up time in UV

• IPC TM-650 2.3.18A-1986 Gel Time for Prepreg Materials

International Telecommunication Union (ITU), Warm-up time in UV

• ITU-T G.8263-2012 Timing characteristics of packet-based equipment clocks (Study Group 15)
• ITU-R QUESTION 238/7-2001 Trusted time source for time stamp authority
• ITU-R QUESTION 2387-2001 Trusted time source for time stamp authority

Professional Standard - Electron, Warm-up time in UV

• SJ 422-1973 Methods of measuremenet for cathode prehcating time of low noise travelling wave tubes
• SJ 1393-1978 Methods of measurement for cathode preheating time of gas discharge noise tubes
• SJ/Z 9010.8-1987 Measurements of electrical properties of electronic tubes and valves--Part 8: Measurement of cathode heating time and heater warm-up time

KR-KS, Warm-up time in UV

• KS M ISO 2578-2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat

German Institute for Standardization, Warm-up time in UV

• DIN EN ISO 2578:1998-10 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993); German version EN ISO 2578:1998

Korean Agency for Technology and Standards (KATS), Warm-up time in UV

• KS M ISO 2578:2022 Plastics — Determination of time-temperature limits after prolonged exposure to heat
• KS M ISO 2578-2007(2017) Plastics－Determination of time－temperature limits after prolonged exposure to heat

SCC, Warm-up time in UV

• DANSK DS/EN ISO 2578:1998 Plastics - Determination of time-temperature limits after prolonged exposure to heat
• AENOR UNE 52003:1958 Determination of work times. Normal time and standard time.
• AENOR UNE-EN ISO 2578:1999 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT (ISO 2578:1993)
• ULC 337-2004 Delayed-Action Timelocks (ULC S337)
• BS PD CEN/TS 16614-2:2020 Public transport. Network and Timetable Exchange (NeTEx)-Public transport scheduled timetables exchange format
• BS 3791:1964 Specification for clothing for protection against intense heat for short periods
• BS 3791:1970 Specification for clothing for protection against intense heat for short periods
• NS-EN ISO 2578:1998 Plastics — Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)

International Organization for Standardization (ISO), Warm-up time in UV

• ISO 2578:1974 Plastics — Determination of time-temperature limits after exposure to prolonged action of heat

Professional Standard - Building Materials, Warm-up time in UV

• JC/T 774-2004 Test method for gel time of prepreg

Institute of Interconnecting and Packaging Electronic Circuits (IPC), Warm-up time in UV

• IPC TM-650 5.1.440-1975 Analysis of Pre-Preg Materials for Gel Time

ES-AENOR, Warm-up time in UV

• UNE 52 003 Determination of working time, standard time and time types

US-FCR, Warm-up time in UV

• FCR FED H-08-4 VOL 3 SEC III 711-1993 HEATING AND VENTILATING SCHEDULES

Danish Standards Foundation, Warm-up time in UV

• DS/EN ISO 2578:1999 Plastics - Determination of time-temperature limits after prolonged exposure to heat

British Standards Institution (BSI), Warm-up time in UV

• BS EN ISO 2578:1999 Plastics. Determination of the time-temperature limits after prolonged exposure to heat
• BS ISO 15040:1999 Composites - Prepregs - Determination of gel time

Association Francaise de Normalisation, Warm-up time in UV

• NF T51-225*NF EN ISO 2578:1998 Plastics. Determination of time-temperature limits after prolonged exposure to heat.
• NF EN ISO 2578:1998 Plastics - Determination of time-temperature limits after exposure to prolonged action of heat
• NF ISO 15040:2001 Composites - Prepregs - Determination of gelling time
• NF EN 12970:2000 Composites - Prepregs - Determination of gelling time
• NF T57-617*NF ISO 15040:2001 Composites - Prepregs - Determination of gel time

Society of Motion Picture and Television Engineers (SMPTE), Warm-up time in UV

• SMPTE EG 40-2002 Engineering Guideline Conversion of Time Values Between SMPTE 12M Time Code, MPEG-2 PCR Time Base and Absolute Time
• SMPTE EG 40-2012 Engineering Guideline Conversion of Time Values Between SMPTE 12-1 Time Code, MPEG-2 PCR Time Base and Absolute Time

RO-ASRO, Warm-up time in UV

• STAS 3331/1-1986 TIME INTERVALS AND SCALES Main coneepts

IETF - Internet Engineering Task Force, Warm-up time in UV

• RFC 3339-2002 Date and Time on the Internet: Timestamps

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector, Warm-up time in UV

• QUESTION 238/7-2001 Trusted time source for time stamp authority

Lithuanian Standards Office , Warm-up time in UV

• LST EN ISO 2578:2002 Plastics - Determination of time-temperature limits after prolonged exposure to heat (ISO 2578:1993)

AENOR, Warm-up time in UV

• UNE-EN ISO 2578:1999 PLASTICS - DETERMINATION OF TIME-TEMPERATURE LIMITS AFTER PROLONGED EXPOSURE TO HEAT (ISO 2578:1993)

Military Standards (MIL-STD), Warm-up time in UV

• DOD A-A-51810-1987 TIMER, INTERVAL

International Electrotechnical Commission (IEC), Warm-up time in UV

• IEC 60151-8:1966 Measurements of the electrical properties of electronic tubes. Part 8 : Measurement of cathode heating time and heater warm-up time
• IEC 60151-8:1966/COR1:1967 Measurements of the electrical properties of electronic tubes. Part 8 : Measurement of cathode heating time and heater warm-up time; Corrigendum 1

(U.S.) Telecommunications Industries Association?, Warm-up time in UV

• TIA-4997-2014 Concurrent Volume and Duration Based PrePaid

GB-REG, Warm-up time in UV

• REG NASA-LLIS-0840-2000 Lessons Learned ?Mean Time To Repair Predictions

Institute of Electrical and Electronics Engineers (IEEE), Warm-up time in UV

• EG 40:2002 EG 40:2002 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE 12M Time Code, MPEG-2 PCR Time Base and Absolute Time
• SMPTE EG 40:2002 EG 40:2002 - SMPTE Engineering Guideline - Conversion of Time Values between SMPTE 12M Time Code, MPEG-2 PCR Time Base and Absolute Time

Others:   Warm-up time in UV.