共找到 150 條與 層溫度 相關的標準，共 10 頁
This International Standard specifies diameters (D) for metal-sheathed thermometerelements and tolerances (d) on those diameters. The diameter
Dimensions of metal-sheathed thermometer elements
1.1 This test method covers a means of predicting temperatures within the asphalt-bound layer(s) of a flexible pavement section. 1.2 Deflection
Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
本測試方法提供了測量路面表面溫度并預測柔性路面部分瀝青結合層內溫度的標準。該方法提供了一種根據路面表面溫度、一天中的時間、前一天的最高和最低氣溫以及需要估計溫度的深度來估計深度溫度的方法。 撓度測試通常涉及路面表面溫度的測量。本標準基于聯邦公路管理局（FHWA）長期路面性能（LTPP）季節性監測計劃
Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures
1.1 This test method covers a means of predicting temperatures within the asphalt-bound layer(s) of a flexible pavement section.1.2
Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
This test method provides a standard for measuring pavement surface temperature and predicting temperatures within the asphalt-bound layer(s
Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures
Analysis of deflection data from asphalt pavements almost always requires that the raw deflections or the analysis results from the load-deflection
Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
Military equipment, ocean climate, hydrological extremes, sea surface temperature
Analysis of deflection data from asphalt pavements almost always requires that the raw deflections or the analysis results from
Standard Test Method for Prediction of Asphalt-Bound Pavement Layer Temperatures
This test method provides a standard for measuring pavement surface temperature and predicting temperatures within the asphalt-bound layer(s
Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures
本標準規定了電工鋼片（帶）層間絕緣涂層溫度特性測試方法。 本標準適用于從室溫到800 ℃溫度范圍內的電工鋼片（帶）層間絕緣涂層溫度特性的測試。它包括材料的下列特性： a）附著性； b）層間電阻； c）壓縮/疊裝系數
Methods of assessment of temperature capability of inter laminar insulation coatings of electrical sheet and strip
This test method provides a standard for measuring pavement surface temperature and predicting temperatures within the asphalt-bound layer(s
Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures
Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures (HM-22; Part IIB)
Standard Method of Test for Prediction of Asphalt-Bound Pavement Layer Temperatures HM-22; Part IIB
Magnetic materials－Part 12：Guide to methods of assessment of temperature capability of interlaminar insulation coatings
Magnetic materials－Part 12：Guide to methods of assessment of temperature capability of interlaminar insulation coatings
