共找到 150 條與 涂包二氧化鈾微球 相關的標準，共 10 頁
本部分規定了涂鈮二氧化鈾微球中氫測定使用的試劑和儀器、測定步驟、結果計算和方法精密度。 本部分適用于涂鈮二氧化鈾微球中氫的測定，當稱樣量約為 0.5g 時測定氫的質量分?jǐn)?shù)范圍為3μg/g～30μg/g
Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plant.Part 9: Determination of hydrogen by inert gas fusion.infrared absorption method
Catalyst dibutyl tin oxide for coating production
This standard prescribes requirements and methods of sampling and test for rutile titanium dioxide used as a pigment in paint industry
Specification for rutile titanium dioxide for coatings
Describes a method for the measurement of thickness of metallic coatings, oxide layers, and porcelain or vitreous enamel coatings, by microscopical
Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
本部分規定了涂鈮二氧化鈾微球中鋰和鎘測定使用的試劑和材料、儀器、測定步驟、結果計算和方法精密度。 本部分適用于涂鈮二氧化鈾微球中鋰、鎘的測定,當取樣量約為 0.5g 時，測定鋰、鎘的質量分?jǐn)?shù)的范圍分別為 1.0μg/g～16μg/g 和 0.4μg/g～8.0μg/g
Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plant.Part 11: Determination of lithium and cadmium by flame atomic absorption spectrometry
本部分規定了涂鈮二氧化鈾微球中鎢測定使用的試劑、儀器、測定步驟、結果計算和方法精密度。 本部分適用于涂鈮二氧化鈾微球中鎢的測定，當稱樣量約為 0.2g 時，鎢的質量分?jǐn)?shù)測定范圍為25μg/g～300μg/g
Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plant.Part 5:Determination of tungsten by zinate toluol-3,4-dithiol.trichloromethane extraction spedrophotometry
VOID - Anodic Coatings on Aluminum (Includes Appendix)
本部分規定了涂鋸二氧化鈾微球中鋼測定使用的試劑、儀器、測定步驟、結果計算和方法精密度。本部分適用于涂鋸二氧化鈾微球中鋼的測定，當稱樣量約為 0.2g 時，鎢的質量分?jǐn)?shù)測定范圍為 25hg/g一300hg/g
Testing method for niobium-coated uranium dioxide microspheres used in submarine nuclear power plants. Part 5: Determination of tungsten. Zinc dithiophene salt-chloroform extraction spectrophotometry.
本部分適用于涂鋸二氧化鈾微球中鋰、鍋的測定，當取樣量約為 0.5g 時，測定鋰、鍋的質量分?jǐn)?shù)的范圍分別 1.0 hg/g-16 hg/g 和 0.4 hg/g-8.0 hg/g
Testing method for niobium-coated uranium dioxide microspheres used in submarine nuclear power plants - Part 11: Determination of lithium and cadmium by flame atomic absorption spectrometry
Zpracovatel: Státní v?zkumn? ústav ochrany materiálu Praha, I?O 00002364 - Ing. Rudolf ?lesinger Technická normaliza?ní komise: TNK 32 Ochrana proti
Metallic and oxide coatings. Measurement of coating thickness. Microscopical method
La norma specifica un metodo per la misurazione dello spessore locale dei rivestimenti metallici, degli strati di ossido e degli smalti porcellanati
Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
This International Standard specifies a method for the measurement of the local thickness of metallic coatings, oxide layers, and porcelain
Metallic and oxide coatings - Measurement of coating thickness - Microscopical method
摘要: 本文檔規定了通過光學顯微鏡對金屬涂層、氧化層、以及瓷或釉涂層的局部厚度進行測量的方法。 主要變化: 增加了光學顯微鏡的數字圖像處理。 增加了關于制備顯微切片的提示和方法。
Metallic and oxide coatings — Measurement of coating thickness — Microscopical method
本部分規定了涂鈮二氧化鈾微球中碳測定使用的試劑和儀器、測定步驟、結果計算和方法精密度。 本部分適用于涂鈮二氧化鈾微球中碳的測定，當取樣量約為 0.2g 時，測定碳的質量分?jǐn)?shù)范圍為30μg/g～500μg/g
Test methods for microsphere uranium dioxide with coated niobium for submarine nuclear power plan.Part 8: Determination of carbon by high frequency heating.infrared absorption method
本部分為GJB 8793《潛艇核動力裝置用涂包二氧化鈾微球檢測方法》的第8部分：碳的測定——高頻感應加熱-紅外吸收法。本部分規定了潛艇核動力裝置用涂包二氧化鈾微球中碳含量的測定方法，適用于該類材料中碳的質量分?jǐn)?shù)范圍為30μg/g～500μg/g的測定
Testing method for niobium-coated uranium dioxide microspheres used in submarine nuclear power plants Part 8: Determination of carbon High-frequency induction heating-infrared absorption method
